The exterior finish of various business facilities plays an important role. In addition to protecting from cold and noise penetration, facades can shape the appearance of buildings, attract the attention of customers and partners, and become a decoration. Family Siding is offered to create such a finish.
Requirements
Commercial is a finishing material that is used to form the facades of warehouses, stores, shopping and entertainment centers, and other facilities used for business. In this case, exterior siding must meet the following requirements:
- Have high strength, resistance to external factors. This applies not only to precipitation, temperature changes, but also ultraviolet radiation, and the effects of aggressive materials. The siding facade must withstand significant mechanical loads and not fade.
- Typically, commercial properties have a large facade area, so the structures must also have significant dimensions in length to speed up finishing work and have fewer joints.
- Beauty is an important factor for many buildings used for business purposes. In this case, you can use lux panel siding to give the facade a stylish and attractive look.
Siding for facades should retain its aesthetic and physical properties for several decades without changes. This applies to the brightness of the color, mechanical strength and other parameters.
Installation process
Installation of panels on commercial buildings is carried out exclusively on an aluminum profile, which acts as a lathing. Only such structures guarantee the strength and durability of the facade.
The installation process is carried out as follows:
- Measurements are taken, the required amount of materials and the falling loads on the frame are calculated. Based on this, the type of siding, the length of the lamellas and the technical parameters of the profile are selected.
- Marking is carried out for fastening the profile. It is carried out so that the joints of the lamellas fall on the vertical supports of the profile, if we are talking about horizontal installation, and vice versa, if the strips will be attached perpendicular to the ground.
- The profile is attached to the load-bearing walls with anchors to ensure the reliability of the structure.
After installing the frame, the installation of siding lamellas is carried out from the bottom up, or from one of the corners of the building, if vertical installation is selected. The corners and finishing seams in window and door openings are sealed with decorative strips.
